Wood and Melamine

step 1

Apply the adhesive to the BACK of the wooden panel using the notched trowel. On the part of the panel where there is no metal mesh, it is preferable to use a trowel with 10mm teeth.

step 2

Apply the wallExperience mesh to the freshly spread adhesive

step 3

Apply uniform pressure across the entire surface of the metal mesh, forcing the adhesive out through the holes and thus ensuring maximum adhesion of the metal to the panel

step 4

Apply the adhesive to the wall using the notched trowel

step 5

Place the wooden panel with the WallXperience mesh on the wall.

Required materials:

Notched trowel for adhesive

Adhesive suitable for the chosen type of covering